VCPLab

Art.-No.: 401.0003.05
Pictures may differ from the original.
Technical details:
Size (W x L x H)1150 x 380 x 1070 mm
45.27 x 14.96 x 42.13 Inch
Weight77 kg
170 lbs
Supply Voltage100 - 240 V
50 - 60 Hz
Input Powermax. 100 Watts
Resolutioncorresponds to 0.1% of the image field
LightingLED
Camera*1-2 cameras
Measuring rangeup to max. 48 mm (1.89“) outer diameter
Measuring according to standardsEN 50396 HD 605 ICEA S-94-649-2000 IEC 60502 -1 IEC 60811 -201; -202; -203 IEC 60840 LV112 (A Factor)
Datasheet
Datasheet


For cable samples with an outer diameter up to 48 mm (1.89")


The cable measuring device VCPLab is a camera-based system for measuring cable geometries from insulations and sheaths. Integrated high resolution sensors allow very accurate measurements of both very thin samples with an outer diameter smaller than 1 mm (0.04“) and cable sheaths with an outer diameter up to 48 mm (1.89").


Device details


  • Robust case seals against extraneous light
  • Central control unit
  • Semi-automatic focussing and illumination
  • Safe from impacts and vibrations
  • Quasi shadow free transmitted light
  • Optimal system status for lighting, optics and camera
  • A measurement with 2 cameras is possible
  • Adjustable operation distance for 2D measurements in laboratories
  • Very precise measurement due to high resolution sensors
  • Standardised individual components
  • Very easy measuring procedure
  • Suitable software VELOX and CAQ-System ProCable available


Optional


VCPLab inclusive All-In-One Windows PC



* the most suitable configuration can only be determined with your minimum and maximum sample outer diameter (OD)


Accessories

Below you will find suitable additional devices for your selected product.
top